Pioneer Hydraulic Co., LTD
- Dension P080 series pump Rexroth piston pump A1VO (Series 10) Dension Gold cup P6P series pump
English
العربية
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
Home> Company News
Pioneer Hydraulic Co., LTD
- AddressNo.9088 SHAHEXI ROAD, NANSHAN DISTRICT,SHENZHEN,CHINA
- Factory AddressNo.9088 SHAHEXI ROAD, NANSHAN DISTRICT,SHENZHEN,CHINA
- Worktime9:00-18:00
- Phone(Working Time)0531-85064681
- Phone(Nonworking Time)0531-85064681
- Fax0531-85064681
Company News
- How are the TIMKEN bearings set up? 2019-08-20 13:34:43
- With tapered roller bearings, the term "setting" simply indicates the specific amount of end play (axial clearance) or preload (axial interference) within a mounted bearing. The flexibility to easily adjust and optimize setting at enough time of assembly...
- What is the method of SKF's bearing adjustment program? 2019-08-20 14:05:45
- Adjustment means setting the internal clearance or preload in an adjusted bearing arrangement during assembly. Operative a certain clearance/preload, or only preload, range then arises. Axial preload in an adjusted bearing arrangement with single row...
- What components does TIMKEN sleeve bearings have? 2019-08-20 14:23:18
- Spacer bearing assemblies speed up bearing installation time because there is no need for bearing adjustment. Spacer bearing assemblies are suitable for use with two-row and four-row Timken ® tapered roller bearings to preset the bench lateral (bench end...
- How to choose the bearing preload properly? 2019-08-20 15:02:19
- This method can also be referred to as "ran- dom statistical adjustment". Using this method, the bearings, shaft, housing, and any other components are manufactured to Normal tolerances. The components, which are considered fully interchangeable, are...
- NTN bearing internal clearance is how to choose. 2019-08-20 15:08:32
- The internal clearance of a bearing under operating Criteria for selecting bearing internal clearance A bearing's life is theoretically maximum when operating clearance is slightly negative at steady operation. In reality it is however difficult to...
- What is the preloading method and quantity of NTN bearing？ 2019-08-20 15:23:53
- The most common method of applying preload on a bearing is change the relative position of the inner and outer rings of the bearing in the axial direction while applying an axial load between bearings on opposing sides. There are two forms of preload:...
- Failure Cause Analysis and Maintenance Strategy of Centrifugal Pump 2018-11-23 14:19:26
- 1_Basic Structure of Centrifugal Pump Centrifugal pump is mainly composed of the following components: First, impeller. Centrifugal pump mainly works on liquid through impeller, which has many impeller types. One is open impeller. Its working efficiency...